Plant species identification using fecal DNAs from red-eared slider and Reeves’ pond turtle in agricultural canals for rural ecosystem conservation

Fecal DNA samples from the red-eared slider and Reeves’ pond turtle, suspected pests of lotus root paddies, were used to identify the plant species eaten by these turtles in order to develop a strategy for rural ecosystem conservation. The fecal samples were obtained from young and adult individuals (mostly female) of both species living in agricultural canals surrounding lotus root paddies in Tokushima Prefecture, Japan. The samples were screened for the presence or absence of DNA from nine plant species using PCR and plant species-specific primers for the rbcL gene of chloroplast DNA. In the red-eared slider, our analysis identified seven plant species in the fecal DNA samples of adults and three plant species in those of young individuals. In Reeves’ pond turtle, our analysis identified two plant species from adult fecal samples and one species from those of young individuals. Thus, adult red-eared sliders consume a greater range of plants than young red-eared sliders or Reeves’ pond turtles. Both turtle species, independently of age, consumed lotus plants and were likely to cause feeding damage to lotus roots. Considering the plant species detected in adult red-eared sliders and these plant habitats, we suggest that this adult turtle is likely to travel between the agricultural canals and the lotus root paddies. These findings will help the development of strategies for preventing damage to lotus roots by these turtles; furthermore, they indicate that fecal DNA analysis will be applicable to investigation of the feeding habits of other animal species.     

Effect of hybrid post treatments on the structural property and water flux of polysulfone hollow fiber membrane

The application of post treatments in preparation of high flux membranes is expanding rapidly. In this work, several hybrid post treatments have been introduced and used for change in the water flux of polysulfone (PSf) hollow fiber membranes. Dry wet spinning method was employed for fabrication of PSf hollow fiber membrane from spinning dope in mass ratio of 15:5:80 of PSf/PVP-K90/NMP. The simultaneous effects of single and hybrid post treatments containing traditional hypochlorite; high pressure injection technique (HPI) of hypochlorite, hot air and hot water treatments on the morphology and water flux of fabricated hollow fibers has been investigated. AFM analysis and image processing of SEM microphotographs of hollow fibers were used for structural studies. The mechanical properties of hollow fibers as well as strain at break and strength also were studied. It was found that the pores size and surface roughness parameter of hollow fiber membranes have been increased after traditional hypochlorite, HPI technique and hot water treatments while decreased when heat treated in air. In general all the employed hybrid post treatments caused to increase in the pores size of hollow fibers although the pores size increase rate in the membranes treated by the hybrid post treatments involving hot air was much lower than the others. The mechanical properties of hollow fibers have been decreased after hybrid and single post treatments containing traditional hypochlorite, HPI technique and hot water treatment while slightly increased after post treatments containing hot air. It was stated that the fabricated PSf hollow fibers were considerably affected by the employed hybrid post treatments. This can be attributed to the combine effects of used post treatments.     

Numerical analysis of injection molding for the Syringe Barrel with optimum design and processing condition

The numerical analysis was performed to predict the potential problem, often occurring during the manufacturing process of the disposable medical device of a great volume. The cavity filling analyses were performed for the new design of the 3cc Syringe Barrel using polypropylene(PP1), and a new nucleated polypropylene(PP2) material for better clarity. These analyses have been performed for different processing conditions as well as various wall thickness designs for both materials. With the nucleated material, only the original wall thickness design has been studied at two different processing conditions for comparison purpose. This study was conducted to investigate the optimum part design and processing condition for two different materials. The most desirable design was selected with Design 3 for material utilization and reduced flow stresses by comparing the field results. The new nucleated polypropylene provided slightly better product quality and processing.     

Coordinated expression and regulation of deiodinases and thyroid hormone receptors during metamorphosis in the Japanese flounder (<Emphasis Type="Italic">Paralichthys olivaceus</Emphasis>)

In vertebrates, thyroid hormone receptors (TRs) and deiodinases are essential for developmental events driven by the thyroid hormones (THs). However, the significance of deiodinases during the metamorphosis of the Japanese flounder (Paralichthys olivaceus) remains unclear. Moreover, regulation and response of the TRs and deiodinases to THs in this fish are poorly understood. Therefore, we detected the expression patterns of THs, deiodinases, and TRs in drug-treated larvae and untreated larvae of P. olivaceus by using enzyme-linked immunosorbent assay and quantitative real-time PCR during P. olivaceus metamorphosis. To further understand the roles of these elements, a rescue assay was performed. Our results show the importance of THs, TRs, and deiodinases in flatfish metamorphosis. Our results also confirm that D1 and D2 activate THs and D3 plays the opposite and complementary role. Moreover, we demonstrated that both TRα and TRβ have important but different roles during P. olivaceus metamorphosis.     

Comparative energy and economic analyses of conventional and System of Rice Intensification (SRI) methods of rice production in Thai Nguyen Province,Vietnam

The consumption of energy inputs in agricultural production has been increasing rapidly during the past decades. However, given the limitations and costs of non-renewable energy, increasing production while using the least energy possible has become a major concern of most nations. Prompted by this concern, we conducted a face-to-face survey of 90 farming households in Thai Nguyen Province, Vietnam, to find out how energy is being used in agriculture and, specifically, in their rice production. Through analysis of energy input–output balances, combined with economic efficiency analysis, a comparison was made of conventional and SRI methods of rice production. The study found that applying the SRI method can save around 23% of energy inputs, while increasing energy outputs by 11%. Economic benefits per hectare also rise by more than 8 million dong (USD 364) compared to those under the conventional cultivation system. The study also showed conflicts between the energy and economic balances for manual compared with machine ploughing operations. This study contributes to providing an overview of energy consumption in rice cultivation at the household level. Its findings can help stakeholders to assess current policies and make better decisions on the uses of energy in agricultural production. In addition, the comprehensive approach taken here to analysing energy use and efficiency could expand the analysis and comparison of energy uses at sectoral or activity level—still a new field in Vietnam and many other countries.     

Potato Facing Global Challenges: How,How Much,How Well?

This paper surveys issues and developments emerging from the keynotes and participants’ presentations during the 20th EAPR Triennial Conference, held in Versailles, France, in July 2017, and puts them into the perspective of the general theme of the meeting: potato facing global challenges. It reveals important and far-reaching innovations in many areas of potato research, including breeding (genomic selection, high-throughput phenotyping, genome editing), plant protection (biocontrol) and seed production, but also a general innovation approach that follows an incremental pathway (and maintains many existing lock-in situations), and favours substitution strategies over system re-conceptualisation and testing, however urgently needed these might be to achieve or improve the sustainability of potato production in the medium to long run. While the assets and importance of potato as both a wholesome food and an essential part of future worldwide food systems were once more evidenced and highlighted, the contributions also revealed (i) a growing dichotomy between research activities carried out in high-income vs in low- or moderate-income countries, respectively; (ii) some gaps in the assessment of the sustainability of potato production in the medium to long run (external inputs such as fertilisers or pesticides, land and energy use efficiency); and (iii) persistent weaknesses in the integration of individual solutions into complete, operational potato production systems. Some areas for future investigations are identified.     

<Emphasis Type="Italic">Lupinus albus</Emphasis> Conglutin Gamma Modifies the Gene Expressions of Enzymes Involved in Glucose Hepatic Production <Emphasis Type="Italic">In Vivo</Emphasis>

Lupinus albus seeds contain conglutin gamma (Cγ) protein, which exerts a hypoglycemic effect and positively modifies proteins involved in glucose homeostasis. Cγ could potentially be used to manage patients with impaired glucose metabolism, but there remains a need to evaluate its effects on hepatic glucose production. The present study aimed to analyze G6pc, Fbp1, and Pck1 gene expressions in two experimental animal models of impaired glucose metabolism. We also evaluated hepatic and renal tissue integrity following Cγ treatment. To generate an insulin resistance model, male Wistar rats were provided 30% sucrose solution ad libitum for 20 weeks. To generate a type 2 diabetes model (STZ), five-day-old rats were intraperitoneally injected with streptozotocin (150 mg/kg). Each animal model was randomized into three subgroups that received the following oral treatments daily for one week: 0.9% w/v NaCl (vehicle; IR-Ctrl and STZ-Ctrl); metformin 300 mg/kg (IR-Met and STZ-Met); and Cγ 150 mg/kg (IR-Cγ and STZ-Cγ). Biochemical parameters were assessed pre- and post-treatment using colorimetric or enzymatic methods. We also performed histological analysis of hepatic and renal tissue. G6pc, Fbp1, and Pck1 gene expressions were quantified using real-time PCR. No histological changes were observed in any group. Post-treatment G6pc gene expression was decreased in the IR-Cγ and STZ-Cγ groups. Post-treatment Fbp1 and Pck1 gene expressions were reduced in the IR-Cγ group but increased in STZ-Cγ animals. Overall, these findings suggest that Cγ is involved in reducing hepatic glucose production, mainly through G6pc inhibition in impaired glucose metabolism disorders.     

Application of silver nanoparticles as an antibacterial mordant in wool natural dyeing: Synthesis,antibacterial activity,and color characteristics

Madder is a natural colorant which is commonly applied with metal salts as a mordant to improve its affinity to fibers and color fastness. Madder produces an insoluble complex or lake in the presence of metal ions on mordanted fabric. In this study, wool fabric was pretreated with AgNPs (silver nanoparticles) as a mordant, then dyed with madder. The wool fabric samples were examined by scanning electron microscopy (SEM) and their colorimetric characteristics were evaluated. The formation of spherical silver nanoparticle was confirmed using UV-Visible spectroscopy, SEM images, and elemental analysis. The average size of synthesized silver nanoparticles on the surface of wool fibers is around 73 nm. The dyed wool samples were pretreated with different concentration of Ag⁺ ions or AgNPs, which showed higher color strength value compared to untreated dyed wool fabric. This pretreatment also presented good antibacterial activity.     

Investigation of mechanical properties of developed antimicrobial PPsuture/Ag nanocomposite

In order to prevent surgical complications due to microbial infections, we have developed polypropylene suture grafted with silver nanoparticles (PPsuture/Ag nanocomposite) by a simple immersion procedure. Physical and mechanical properties of developed suture are investigated. Suture surface characteristics are examined by scanning electron microscopy (SEM) imaging and atomic force microscopy (AFM). Silver content on suture surface was determined by Inductively coupled plasma atomic emission spectroscopy (ICP-AES). The mechanical properties of developed antibacterial PP suture/Ag were studied. We note that proposed silver coating method has not affected mechanical performances of suture. Antimicrobial performances of PP suture/Ag nanocomposites against S. aureus and E. coli colonies were also investigated.     

Thermal,swelling and stability kinetics of chitosan based semi-interpenetrating network hydrogels

The present study is focused on studying the swelling kinetics, thermal and aqueous stabilities, and determination of various forms of water in the chitosan (CS) and polyacrylonitrile (PAN) blend and semi-interpenetrating polymer network (sIPN). CS/PAN blend hydrogel films were prepared by solution casting technique. The blend film with optimum swelling properties was selected for the synthesis of sIPN. CS in the blend was crosslinked with the vapors of Glutaraldehyde (GTA) to prepare sIPN. The fabricated CS/PAN blend and sIPN hydrogels films were characterized with Fourier transform infrared (FTIR), thermal gravimetric analysis (TGA) and field emission scanning electron microscope (FESEM). The kinetics of swelling, bound and unbound waters and aqueous stability were determined experimentally. FESEM showed good miscibility between CS and PAN, FTIR showed no chemical interaction between CS and PAN; however, it did show a doublet for the sIPN, TGA showed improved thermal stability and swelling kinetic followed second order kinetics. The degree of swelling of the sIPN hydrogels samples at room temperature varied from ~2200 % (with a fair degree of stability (~30 %)) to ~1000 % (with high degree of aqueous stability (43 %)) with increase in the crosslinking time. The calculated unbound water (W_UB) max., for the blend was 52.3 % whereas for the bound (W_B) the max., was 41.9 %. However, for sIPN hydrogel films, the W_UB water decreased (max. 21.0 %) where as the W_B increased (max. 52.0 %). The decrease in W_UB and increase in the W_B is attributed to the formation of a compact structure and increase in the contact area between the water and polymers in sIPN hydrogels due to the induction of new water contacting point in these hydrogel films, respectively.